本區搜索:
Yahoo!字典
打印

[學科討論] Phy heat 題目 求解+ans

Phy heat 題目 求解+ans

Q1 A cylinder is closed by a piston connected to a spring of constant 2.40 x 103 N/m. With the spring relaxed, the cylinder is filled with 5.00 L of gas at a pressure of 1.00 atm and a temperature of 20.0°C.

a) If the piston has a cross-sectional area of 0.0130 m2 and negligible mass, how high (in meter) will it rise when the temperature is raised to 250°C?
b) The pressure of the gas at 250°C = __ × 105 P





Q2
In the figure below, a 1.00 mol monatomic ideal gas is taken through the cycle. At point A, the pressure, volume, and temperature are Pi, Vi, and Ti, respectively. (Answer the following questions in terms of R and Ti.)
a) Find the total energy entering the system by heat per cycle.
_?_  × nRTi
b) Find the total energy leaving the system by heat per cycle.
?__ × nRTi

c) Find the efficiency of an engine operating in this cycle.







[ 本帖最後由 abcdefi 於 2015-12-2 09:08 PM 編輯 ]
   

TOP

重要聲明:小卒資訊論壇 是一個公開的學術交流及分享平台。 論壇內所有檔案及內容 都只可作學術交流之用,絕不能用商業用途。 所有會員均須對自己所發表的言論而引起的法律責任負責(包括上傳檔案或連結), 本壇並不擔保該等資料之準確性及可靠性,且概不會就因有關資料之任何不確或遺漏而引致之任何損失或 損害承擔任何責任(不論是否與侵權行為、訂立契約或其他方面有關 ) 。